Sold out

Sea Eagle SE 330 2 Person Inflatable Kayak


Customer Reviews

Be the first to write a review

Notify me when this product is available:

About the Sea Eagle 330 Inflatable Kayak

This is Sea Eagle's lightest, most portable kayak. It also America's most popular, versatile inflatable kayak. It weighs just 26 lbs. and packs down small enough to fit in the smallest car trunk. But don't let this light weight fool you, it's a rugged kayak able to hold 2 people or 500 pounds. But it is still easy enough to be carried and paddled by one person.

It includes the best interior spacing for either an adult and child or two smaller adults. If you need a little more room please checkout the larger SE370.

About the Sport Kayaks Series

Sea Eagle was established in 1968 when they started selling an inflatable kayak very similar to the current Sea Eagle Sport Kayak models. Since then they have made many improvements to their line of inflatable kayaks. Presently they offer superior one way valves, thicker hull material and an even better material formulation for greater strength, reliability, and durability on the water.

This Sea Eagle Sport Kayaks series packs into just a fraction of their inflatable size and they can be carried almost anywhere there is water and setup in less than 10 minutes!
They are great fun for beginners and experienced paddlers alike. With a lightweight design and efficient hull shape, the Sport Kayaks are swift paddling boats and easy to handle for both young and old.

When you consider their cost verses the way they can be used, Sea Eagle Sport Kayaks truly represent one of the best values in boating today!


  • Person Capacity 2
  • Hull Weight 26 lbs.
  • Length 11 ft. 2 in.
  • Width 2 ft. 10 in.
  • Interior 9' 6" x 15"
  • Load Capacity 2 Person or 500 lbs.
  • Deflated 24" x 16" x 7"
  • Chambers 3 (port, starboard, floor)
  • Tube Diameter 10"
  • Air Valves 5 Deluxe One Way
  • Inflation time 6 min
  • Seam High Frequency Welded
  • Material 33 mil Polykrylar (K80 PVC)
  • Floor Inflatable I-beam construction
  • Whitewater Rating Suitable up to Class III
  • Inflation Pressure 1.1 psi
  • Certifications
  • National Marine Manufacturer Association

Standard Features

  • NMMA Certified
  • Open and close drain valve
  • Five deluxe one-way valves
  • Sun & saltwater resistant hull material
  • Lashed down inflatable spray skirts
  • I-beam construction floor
  • 2 skegs on the bottom for better tracking & speed
  • Bow & Stern Grab Line

Key Features

  • Integral 5-Tube I-beam Floor: several years ago Sea Eagle redesigned their floor construction from a 7 tube I-beam floor to 5 tubes. This greatly enhanced the paddling performance of their Sport Kayaks series because the paddler sits higher up and most of the weight is supported by the floor, rather than the side chambers. Because larger I-beam tubes have more rigidity than smaller tubes it also creates a more sturdy inflatable floor with natural chines which improves the speed and tracking of the Sport Kayaks series, making it easier to paddle for long distances at will.
  • Two Rear Skegs For Tracking And Speed: tracking is very important in a kayak. Inflatable kayaks need skegs to track smoothly across the water - otherwise paddling effort is wasted. Cheaper competitive boats without rear skegs just weave and wander across the water, wasting paddling effort. These Sport Kayaks feature two molded skegs - just like a surf board - so you go faster and further with less paddling effort required! These skegs are made of an almost indestructible molded plastic that will not be harmed by hitting rocks or running up on the beach.
  • Deluxe One-way Valves On All Air Compartments: these Deluxe One-way Valves are simple and easy to use. A great improvement over traditional pipe valves which are hard to close, loose air easily and crack over time. Sea Eagle Deluxe Valves come with an inner diaphragm which allows air to be pumped in without air escaping out. The larger opening of the Deluxe Valves allows for rapid inflation and deflation. Comes with molded O-rings that can't be lost and a tether that will keep them attached to the hull at all times. Final seal is achieved by the outside cap for true air tightness.